Part Number: T4069K
Product Name: Genuine New NXT/XP Special Double-Sided Tape for PAM Calibration
This high-adhesion double-sided tape is exclusively for PAM calibration testing, fixing glass standard chips during placement precision inspection.
Heat-resistant and stable adhesion, original new single roll packaging, directly used for daily machine calibration maintenance.
We supply full FUJI NXT SMT consumables including calibration tapes, splicing tapes, head batteries and feeder spare parts with abundant stock and fast global delivery.
#T4069K #FUJINXTPAMTape #NXTPlacementCalibrationTape #OriginalNewSMTDoubleSidedTape #UPKTECH #SMTpartsGLOBAL #PCBA #Feeder #Nozzle
Part Number: H1021H / 2AGKHA008100
Product Name: Genuine New FUJI NXT V12 Head 3.6V Lithium Backup Battery
This original ER6V 3.6V lithium battery retains head servo coordinate data when power cuts off, specially for NXT III V12 placement heads.
Low self-discharge, equipped with standard plug and red-black twisted wire harness, direct plug-and-play replacement.
100% original new, stable voltage output to avoid head position loss and machine alarm.
We supply full FUJI NXT spare parts including head batteries, circuit boards, splicing tapes and calibration PAM reels with abundant stock and fast global delivery.
#H1021H #2AGKHA008100 #FUJINXTV12HeadBattery #3.6VLithiumBackupCell #OriginalNewSMTHeadBattery #UPKTECH #SMTpartsGLOBAL #PCBA #Feeder #Nozzle
NXT L-Tray, NXT LT2-Tray, NXT LTC-Tray
Product Name: FUJI NXT Series Modular Mounter Magazine L-Type Storage Tray
These original metal trays are exclusively designed for FUJI NXT mounter tray magazines, used to load IC, QFP, BGA and other tray-packaged electronic components.
Made of high-rigidity matte black alloy with precise positioning holes, they fit magazine racks perfectly and resist abrasion under frequent module sliding. Bilingual warning marks protect internal sensor beams from accidental contact to avoid machine faults.
Different models support different component sizes and loading capacities, all plug-and-play without structural modification during maintenance replacement.
We supply full FUJI NXT spare parts including L/LT2/LTC trays, feeders, circuit boards, splicing tapes and wiring harnesses with sufficient stock and fast worldwide delivery.
#NXTLTray #NXTLT2Tray #NXTLTCTray #FUJINXTTrayMagazine #FujiSMTComponentStorageTray #UPKTECH #SMTpartsGLOBAL #PCBA #Feeder #Nozzle
Part Number: T60537
Product Name: Genuine NXT PAM Calibration Clear Double-Sided Tape (83mm width)
It is specially used to fix standard glass chips during placement precision calibration. High transparency and stable adhesion avoid slipping during PAM testing.
Original single roll packaging, directly applicable for daily machine maintenance and CPK inspection.
We supply full FUJI NXT consumables including calibration tapes, splicing tapes, head backup batteries and feeder spare parts with abundant stock and fast global delivery.
#T60537 #FUJINXTPAMTape #83mmPAMDoubleSidedTape #SMTPlacementCalibrationConsumable #OriginalNXTAdhesiveTape #UPKTECH #SMTpartsGLOBAL #PCBA #Feeder #Nozzle
Part Number: 2AGKSB001904
Product Name: FUJI NXT Modular SMT Mounter Signal & Power Wiring Harness
This original Fuji wiring harness is specially designed for FUJI NXT series high-speed modular placement machines, responsible for stable power supply and real-time signal transmission between machine sliding modules, servo motors, vision systems and main control cabinets.
Each harness is individually wrapped with transparent OPP dust-proof film, fixed by customized cardboard positioning supports and bundled with cable ties. Unique serial number labels are attached to every single cable for batch traceability and quick replacement during equipment maintenance. Adopting multi-core shielded wire structure, it effectively isolates electromagnetic interference inside the workshop to guarantee accurate transmission of position feedback, vacuum detection and motion control signals.
The outer insulation layer adopts high-flexibility wear-resistant material, capable of enduring long-term frequent reciprocating bending of sliding modules without wire cracking or breakage. Standard carton batch packaging facilitates warehouse stock management and global bulk delivery. Plug-and-play terminal design eliminates complicated on-site rewiring work.
We supply full range FUJI NXT spare parts including various specification wiring harnesses, feeders, head assemblies, maintenance grease gun kits and original factory packaging cartons with abundant inventory and fast worldwide door-to-door shipping.
#2AGKSB001904 #FUJINXTCableHarness #NXTMounterWiringAssy #FujiSMTPlacementMachineSignalCable #ModularMounterSpareWiring #UPKTECH #SMTpartsGLOBAL #PCBA #Feeder #Nozzle
Part Number: AJ1GF04
Product Name: FUJI NXT Modular SMT Placement Machine Wiring Harness
This original FUJI wiring harness is exclusively compatible with FUJI NXT series high-speed modular mounters, delivering stable power supply and real-time signal transmission between sliding modules, servo motors, sensor components and the main control cabinet.
Each cable is individually protected by transparent dust-proof plastic film, fixed with custom cardboard positioning brackets and secured with cable ties. Every harness carries an exclusive identification label printed with part number and unique serial number for warehouse inventory tracking and fast equipment maintenance replacement. Multi-core shielded wire design effectively filters electromagnetic interference from factory workshop environments, ensuring accurate transmission of position feedback, vacuum detection and motion control signals.
The outer sheath is made of high-flex wear-resistant material, capable of enduring long-term frequent reciprocating bending of machine moving modules without cracking or internal wire breakage. Standard carton batch packaging simplifies storage and bulk global shipment, with plug-and-play terminals that eliminate complex on-site rewiring after installation.
We supply full series FUJI NXT spare parts including all models of wiring harnesses, feeders, head assemblies, maintenance grease gun kits and original factory packaging cartons with sufficient stock and fast worldwide door-to-door delivery.
#AJ1GF04 #FUJINXTCableHarness #NXTMounterWiringAssy #FujiSMTPlacementMachineSignalCable #ModularMounterSpareWiringHarness #UPKTECH #SMTpartsGLOBAL #PCBA #Feeder #Nozzle
Part Number: 2AGKSB002301
Product Name: FUJI NXT Series Modular Mounter Signal & Power Wiring Harness
This original FUJI wiring harness is specially matched with FUJI NXT high-speed modular SMT placement machines, responsible for power supply and signal transmission between machine modules, servo drives, vision units and control cabinets.
Each cable is independently wrapped with transparent dust-proof OPP film, fixed by cardboard positioning brackets and bundled with cable ties. Every harness is attached with a unique identification label printed with part number and serial number for batch tracking and quick replacement during maintenance. It adopts multi-core shielded wire structure to effectively isolate workshop electromagnetic interference, ensuring stable transmission of vacuum detection, position feedback and motion control signals.
The outer jacket is made of high wear-resistant flexible material, which can withstand long-term reciprocating bending of the sliding module without cracking or wire breakage. Uniform carton bulk packaging is convenient for warehouse storage and global bulk shipment, plug-and-play design without secondary wiring modification after installation.
We supply full series FUJI NXT spare parts including various specification wiring harnesses, feeders, head assemblies, maintenance tool kits and original packaging cartons with sufficient stock and fast worldwide delivery.
#2AGKSB002301 #FUJINXTCableHarness #NXTMounterWiringAssy #FujiSMTMachineSignalCable #ModularPlacementMachineSpareHarness #UPKTECH #SMTpartsGLOBAL #PCBA #Feeder #Nozzle
Part Number: 2AGKSB002000
Product Name: FUJI NXT Modular Mounter Equipment Main Wiring Harness
This original Fuji wiring harness is exclusively matched with FUJI NXT series modular high-speed SMT placement machines, used for power transmission and signal data communication between machine base, feeder station, head unit and control cabinet.
Each cable is individually packed with dust-proof plastic film and fixed with kraft positioning card, equipped with exclusive label printed with part number and serial number for traceability. Adopts multi-core shielded wire design, effectively resist electromagnetic interference in workshop environment to ensure stable signal transmission of servo motor, vision camera and sensor components.
Built with wear-resistant outer insulation layer and standardized plug terminals, it features strong tensile resistance and long service life under long-term high-frequency reciprocating movement of machine modules. Uniform batch packaging in cartons, convenient inventory management and one-to-one replacement for equipment maintenance without wiring modification.
We supply full series FUJI NXT spare parts including wiring harnesses, feeder assemblies, head vacuum boards, maintenance grease gun kits and original equipment cartons with abundant stock and fast global door-to-door delivery.
#2AGKSB002000 #FUJINXTCableHarness #NXTMounterWiringAssy #FujiSMTEquipmentSignalCable #ModularPlacementMachineSpareWires #UPKTECH #SMTpartsGLOBAL #PCBA #Feeder #Nozzle
1.Condition：Original New/Used
2.Min Order Qty: 1 Pcs
3.Ready for immediate shipment.
4.Throughly inspected and maintained.
5.With warranty
6.Panasonic, Fuji, Yamaha, JUKI and Hanwha Chip Mounter
1.Condition：Original New/Used
2.Min Order Qty: 1 Pcs
3.Ready for immediate shipment.
4.Throughly inspected and maintained.
5.With warranty
6.Panasonic, Fuji, Yamaha, JUKI and Hanwha Chip Mounter
1.Condition：Original New/Used
2.Min Order Qty: 1 Pcs
3.Ready for immediate shipment.
4.Throughly inspected and maintained.
5.With warranty
6.For Panasonic, Fuji, Yamaha, JUKI and Hanwha Chip Mounter
Power Supply Module for FUJI NXT CPU BOX
✅ Fully compatible with all NXT Gen1/Gen2/Gen3 CPU BOX, all power specifications covered
✅ Industrial large-capacity filter capacitors deliver steady output, resist workshop grid voltage interference
✅ Multi-layer safety protection cuts power automatically under overload/short circuit to safeguard expensive mainboards
✅ Dustproof sealed metal casing, resistant to solder paste dust & temperature variation, prevent capacitor leakage & bulging
✅ Full machine load test before delivery, plug-and-play to minimize production downtime
✅ Mass ready stock, support single purchase & bulk spare part order for production lines
FUJI NXT I / NXT II / NXT III M3/M6 CPU Box Control Cabinet
Main Functions
Supply multi-channel stable power to CPU mainboard, vision cameras, servo communication bus and operation display
Filter grid clutter to reduce recipe loss and module disconnection caused by voltage surge
Auto power cut under abnormal current/voltage to avoid burning internal PCB and storage hardware
#NXTCpuBoxPowerSupply #FUJINXTCabinetPower #SMTMounterPowerModule #NXTControlBoxPowerUnit #UPKTECH #SMTPartsGLOBAL #PCBA #Feeder #Nozzle
Wechat